For those of you that want the Mach 460 Door tweeters but can’t find the speakers here is a way to make your own and I personally think this looks better and the sound of my JL’s are great. Tools Needed: Philips head screwdriver Flathead screwdriver Electrical tape Wire cutters, razorblade, scissors, teeth, whatever you find easiest. Wire splicing connectors if you want. Not a necessity. Tweeters Something to cut a clean hole into hard plastic. Get a good set of tweeters that have a resister on it that will only let high frequencies play through it so you don’t blow them. Normally cost around $50 for a decent set. I used JL Audio and I found mine on Amazon. Remove the plastic inserts. Then use a Dremel or some means to cut the appropriate size hole or if you have surface mounts cut a hole just big enough to fit the wire through. [TIP: start small to large when cutting the hole] Remove the door panel You can disconnect the hot wire on the battery if you’re worried but I didn’t.First, remove the door lock knobs. Manual windows; pop off the handle with a flat head screw driver. Electronic windows and locks; pull the whole thing out using your finger you should be able to pull it o...